Latest revision as of 10:48, 8 April 2024

Responsive Web Payment

This scenario is the most common integration for webshops that don't need any extra steps in the payment process. Users can pay through a web browser (PC, tablets, mobiles, etc.) or through the Barion mobile app (if it is installed). The Barion mobile app catches the redirection to the Barion Smart Gateway and it handles the payment within the app. You can also integrate Barion Smart Gateway to your mobile app.

Prerequisites

To be able to integrate your webshop with the Barion Payment Gateway:

You must register a Barion wallet at the Barion website or in the Sandbox environment. Learn more about the Sandbox environment here.
For this wallet you have to create a shop which should be approved by Barion.
For every currency you plan to conduct payments in you have to make sure there is an account created in your Barion wallet. This means that if you plan to have USD payments then there should be an USD account created in your wallet.
To make sure every corner case scenario works for your webshop it is best to topup that account with a small amount (approx. 5-10EUR or your choice of currency around the same value).
For the technical communication guide please read the this: Calling the API

The payment process

In all scenarios the payment starts with the preparation of the payment. This means that the webshop creates a JSON representation of the payment data. This data contains all the necessary information about the items to be purchased, the customer and the desired payment scenario. This JSON should be sent as the body of a POST request to the /v2/Payment/Start API endpoint. After the system receives the data it will be validated. If all the properties are correct a payment will be prepared in the database and a HTTP response is returned to the webshop.
The response should be processed by the webshop system and the Id of the payment (PaymentId) should be extracted from the response. This Id should be stored in the webshop database with the initial information about the payment. This is necessary because every following request is based on this Id.
The next step is to redirect the customer to the Barion website to a specific URL with the PaymentId as a query parameter.
After the customer paid the requested amount and the payment is completed a server to server request is initiated by Barion towards the webshop. This is called the callback mechanism.
At this point the customer is advised on the screen to return to the webshop to complete the process. If the customer clicks through the customer is redirected back to the webshop.
At any point of the process the webshop can request information about the payment through the v4/Payment/<PaymentId>/PaymentState API endpoint.

The following two diagrams show the payment process in HTTPS request level detail.

Guest user pays with bank card

Barion user pays with their wallet

Preparing the payment

To prepare a new payment an HTTP POST request should be made to the /v2/Payment/Start API endpoint. The body of this request should contain a well-formed JSON representation of the desired payment process. To see the full specification of this endpoint head over to the API reference.

Structure

The structure of a Barion Gateway payment is hierarchical. The payment is the meta information that describes the process. This payment contains at least one transaction. The transaction represents a financial transfer from a customer to a seller. The payment can contain multiple transactions, this is up to the webshop to decide how the structure of the whole process should be represented. The purchased products should be represented in the Items array of the transactions. The total payment amount will be calculated from the attached transactions. The amount specified for the items is not validated against the transaction Total it is up to the integrator to make sure it is calculated appropriately.

Identification

To make sure that the payment can be properly identified always generate an Id for the payment, that is is unique in the webshop. This should be sent in the PaymentRequestId property. This is true for all the transactions attached to the payment. For this user the POSTransactionId of the PaymentTransaction entity. If the webshop only handles one transaction per payment it is possible to use the same Id for both the PaymentRequestId and the POSTransactionId although it is not recommended. In addition to this you can also provide an OrderNumber for the payment.

Payment scenario

In this scenario the PaymentType should be set to Immediate indicating that the financial transaction should take place immediately after the successful customer charge. This means that the amount charged will be placed immediately in the account of the webshop.

Every attached transaction has a Payee property. That property indicates the user wallet that will receive the amount of the transaction. It is very important to make sure that this wallet is the same wallet that opened the webshop. In technical terms the POSKey provided should belong to one of the Payee's shop. This is valid for all the transactions attached to the particular payment. If one of the payees is different the scenario autmatically will be upgraded to sharing economy scenario.

Currency

You can define the currency of the payment by specifying the Currency payment property. It is important to mention that multi-currency transactions are not supported. This means that the currency you define for the payment will be automatically the currency of all the attached transactions. The currency also defines the available precision of the transaction Total. For example for HUF payments no decimal digits allowed while for EUR payments two decimal digits can be used. To be able to receive payments in the selected currency the shop has to have an account created in that currency in the wallet. This means that if the shop only has HUF and USD accounts in its wallet, EUR payments will not be allowed to prepare.

Example preparation

This is an example POST Start with minimum provided information.

IMPORTANT

Always double check your POSKey and Payee properties. The POSKey is different in the sandbox and live Barion systems.

{
    "POSKey": "630ee026-3e19-469f-8325-afc9bd1ae6a6",
    "PaymentType": "Immediate",
    "PaymentRequestId": "EXMPLSHOP-PM-001",
    "FundingSources": ["All"],
    "Currency": "EUR",
    "RedirectUrl": "https://merchanturl/Redirect?paymentId=xyz",
    "CallbackUrl": "https://merchanturl/Callback?paymentId=xyz",
    "Transactions": [
        {
            "POSTransactionId": "EXMPLSHOP-PM-001/TR001",
            "Payee": "[email protected]",
            "Total": 37.2,
            "Comment": "A brief description of the transaction",
            "Items": [
                {
                    "Name": "iPhone 7 smart case",
                    "Description": "Durable elegant phone case / matte black",
                    "Quantity": 1,
                    "Unit": "piece",
                    "UnitPrice": 25.2,
                    "ItemTotal": 25.2,
                    "SKU": "EXMPLSHOP/SKU/PHC-01"
                },
                {
                    "Name": "Fast delivery",
                    "Description": "Next day delivery",
                    "Quantity": 1,
                    "Unit": "piece",
                    "UnitPrice": 12,
                    "ItemTotal": 12,
                    "SKU": "EXMPLSHOP/SKU/PHC-01"
                }
            ]
        }
    ]
}

Processing the successful response

After a successfully preparing the payment a JSON response is sent back as response. This JSON should be processed and some properties should be saved in the database of the webshop. The single most important property of this JSON is the PaymentId. This should be saved into the database of the webshop along the the ids of the transactions (TransactionId) attached.

The successful response will also contain the appropriate URL where the customer should be redirected so the integration doesn't have to hard-code any URL. This information is displayed in the GatewayUrl.

At this point the Status of the payment should be Prepared. This means that all the necessary information is prepared for the payment but no financial transfer happened yet.

In the Transactions array are all the transaction that were processed. This array also contains the various fee transactions as well. So if there are transaction here that are not familiar it's because they were not sent by the webshop.

Example success response

In this response there are no errors because the Errors array is empty. There is no fee charged for the payment because there is only one transaction in the Transactions array and it's the one the webshop sent in.

{
  "PaymentId": "31dfdaff269e4aa0b7a12e1c0cc2f933",
  "PaymentRequestId": "EXMPLSHOP-PM-001",
  "Status": "Prepared",
  "QRUrl": "https://api.barion.com/qr/generate?paymentId=31dfdaff-269e-4aa0-b7a1-2e1c0cc2f933&size=Large",
  "Transactions": [
    {
      "POSTransactionId": "EXMPLSHOP-PM-001/TR001",
      "TransactionId": "a4ead1d965bd48b3934847504c67ec8c",
      "Status": "Prepared",
      "Currency": "EUR",
      "TransactionTime": "2017-02-03T13:07:10.215",
      "RelatedId": null
    }
  ],
  "RecurrenceResult": "None",
  "GatewayUrl": "https://secure.barion.com/Pay?Id=31dfdaff269e4aa0b7a12e1c0cc2f933",
  "RedirectUrl": "https://webshop.example.com/Redirect?paymentId=31dfdaff269e4aa0b7a12e1c0cc2f933",
  "CallbackUrl": "https://webshop.example.com/blank.html?paymentId=31dfdaff269e4aa0b7a12e1c0cc2f933",
  "Errors": []
}

Processing the error response

If there is something wrong during the preparation an error response will be provided. If this happens the Errors array will be filled out with information about the problem.

Possible error responses

Error code	Description
ModelValidationError	This happens when some of the input properties fail the basic validation. For example a string property exceeds its allowed length.
AuthenticationFailed	The provided `POSKey` is invalid. Check that the key used is appropriate for the environment. The test and production environment are separate so the keys are only valid for one environment. Another problem could be that the provided key is the public key and not the private key. For API requests the secret API key should be used.
ShopIsClosed	The shop is closed in the Barion system, no payments are allowed.
InvalidUser	There is a problem with one of the participants taking part in the payment. All of them should be registered Barion users.
UserCantReceiveEMoney	There is a problem with the recipient of the payment. Every `Payee` specified in the attached transactions should be a fully registered user of Barion.
NotExistingCurrency	The currency specified for the payment is not supported by the Barion system.
InvalidFundingSource	The specified funding source is not valid. Check the `FundingSources` input parameter.
InvalidCulture	The specified culture is not supported by the Barion system.
~~DoNotHaveEnoughMoneyToPreparePayment~~	In certain corner cases when the webshops Barion balance and the incoming money is not enough to cover the Barion fee this error message is sent. Note: this error code is not sent anymore
FacilitatorDoesntHaveEnoughMoney	The maximum possible income from the payment will not cover the total amount of fees the shop must pay after this transaction (topup the account of the shop, thereafter payments could be prepared).

Example error response

For example this is the error response when the authentication data (the POSKey) is not correct.

{
  "Errors": [
    {
      "ErrorCode": "AuthenticationFailed",
      "Title": "User authentication failed.",
      "Description": "The login information provided is incorrect. There is no such user in the system or the password is incorrect.",
      "EndPoint": "https://api.barion.com/v2/payment/start",
      "AuthData": null,
      "HappenedAt": "2017-02-03T13:18:07.8878292Z"
    }
  ]
}

Redirecting the customer

After a successful payment preparation the next step is to redirect the customer to the secure Barion site. The URL is provided in the response of the Payment/Start request. Make sure that the user is redirected properly no iframe hacks are allowed. At this point the webshop gives the flow control to the Barion system. There is no need for constant GetPaymentState requests, at least for a reasonable time period. The callback mechanism will take care of the notification. However mistakes could happen so after a reasonable time the webshop can make a GetPaymentState request just to rule out any callback errors. Again, this should not be frequent, let the user fill out its credit card information. If you want to shorten the period the user is allowed to pay you can specify this time period in the PaymentWindow property.

Once the customer arrives to the secure Barion server the payment GUI is displayed. At this point the customer either pays with e-money or with its credit card. If the payment fails for any reason (invalid card for example) the customer can try the payment again without leaving the Barion payment GUI. This means that the customer won't return automatically to webshop when the payment fails. This is worth mentioning because this could lengthen the time the customer takes at the Barion server.

IMPORTANT

Do not try to pay with the account that owns the shop! It is not permitted to purchase in your own shop!

Minimum amounts

These are the minimum amounts that the payments must surpass. In case the payment is prepared with less amount, the customer won't be able to pay it.

Card payment
Currency	Minimum amount
HUF	10 Ft
EUR	0.1 €
USD	$0.1
CZK	1 Kč

Banktransfer payment
Currency	Minimum amount
EUR	1 €
CZK	10 Kč

Processing the callback

Once the payment is completed a callback request is sent to the webshop's server to the specified URL. In fact any change happens in the state of the payment a callback is sent out to notify the webshop. This can be interpreted as a signal to start a GetPaymentState request towards the Barion system. The callback signal is only a signal that does not indicate the success of the payment! Therefore a GetPaymentState request is mandatory to make sure that the appropriate payment state is registered in the webshop as well. Read more about the whole callback mechanism.

WARNING

Flooding the Barion servers with unnecessary API calls, instead of relying on the callback mechanism, may lead to suspension of the shop.

Requesting information about the payment

Once the webshop server receives the callback the webshop needs to request information about the outcome of the payment process. For this a Payment/<PaymentId>/PaymentState request should be sent to the Barion API.

Processing the returning customer

At the end of the payment process the customer decides whether to return to the webshop or just close the browser. Therefore no financial decision should be made based on the returning customer. The only valid way to decide what to do with the order to request information about the payment through the GetPaymentState API endpoint.

Reference

Responsive web payment: Difference between revisions